Skip to the content

The best LGA 775 processor for your board, by chipset

Last updated: By Marek Halloran10 min readRetro & Legacy HardwareCPU Mods

The best LGA 775 processor for your board, by chipset

The best LGA 775 processor for most boards is the Core 2 Quad Q9650: four cores at 3.00 GHz, 12 MB of L2 cache and a 1333 MT/s front side bus, rated at 95 W. That answer holds only if your chipset and BIOS support 45 nm quad-cores, which means a P35, G33, X38, X48 or any 4 Series chipset such as the G41 or P45. Older chipsets set a lower ceiling. A P965 or 975X board tops out at 65 nm quads on a 1066 MT/s bus, a 945 board takes dual-cores only, and Intel rated the G31 for quads at 1066 even though many G31 boards list more. The table below gives one strongest sensible chip per chipset class, meaning inside what Intel and the board maker documented, at stock settings.

First, find the chipset and the support list

Everything below keys off the chipset, which CPU-Z shows in its Mainboard tab next to "Northbridge". Then find the board maker's CPU support list for your exact model and revision; our guide to checking whether a motherboard supports a processor walks through both.

The chipset tells you what Intel validated. The support list tells you what the board maker delivered in BIOS updates, and it can be narrower (an early revision with no 45 nm BIOS) or wider (a G31 board listing 1333 MT/s quads). When the two disagree, trust the list, and flash the BIOS version it names before you swap chips.

A refresher: 1066 MT/s is a 266 MHz bus clock moving four transfers per tick, 1333 is 333 MHz, 1600 is 400 MHz, and core clock is bus clock times multiplier.

The best LGA 775 processor by chipset

Chipset class Intel's FSB rating (MT/s) Quads and 45 nm Strongest sensible quad Dual-core choice Xeon adapter route
945P, 945G, 945PL, 945GC, 945GZ, 946PL, 946GZ 533/800/1066 on 945P and 945G; 533/800 on the rest No quads; Core 2 Duo only on later board revisions None E6700 (2.66 GHz) on 1066, E4700 (2.60 GHz) on 800 Not worth it
P965, 975X (G965, Q965: duals only) 533/800/1066 Quads at 1066 (975X: later board revisions); no official 45 nm Q6700 G0 (2.66 GHz) or Q6600 G0 (2.40 GHz) E6700, or E7600 (3.06 GHz) if listed Long shot
G31, P31 800/1066/1333 45 nm yes; Intel rates quads up to 1066 Q9650 if the board lists it, otherwise Q6700 E8600 (3.33 GHz) E5450 if the list shows an E0 Yorkfield at 1333
P35, G33, G35, Q35, Q33 800/1066/1333 Yes, with a 45 nm BIOS Q9650; QX9650 or Xeon X3380 if listed E8600 E5450; X5470 if 130 W chips are listed
G41, G43, G45, P43, P45, Q43, Q45 800/1066/1333 (P45 at 1600 is unofficial) Yes Q9650 E8600 E5450
X38, X48 800 to 1333 on X38; 800 to 1600 on X48 Yes Q9650 or QX9650; QX9770 on X48 only with serious cooling E8600 X5470; X5472 on X48

FSB ratings and quad support follow Wikipedia's list of Intel chipsets and, for the G31, Intel's product brief. Clocks come from Wikipedia's Core 2 and Xeon lists and Intel's ARK entries.

945 and 946: dual-core only

Wikipedia's chipset list is blunt: some later 945P, 945G and 945PL boards run some Core 2 processors with later BIOS releases, and Core 2 Quad is not supported. The 945PL, 945GC and 945GZ also lack the 1066 bus, apart from late 945GC parts. So the strongest chip is a Core 2 Duo at the board's bus: the 65 nm E6700 (266 x 10 = 2.66 GHz, 4 MB of L2, 65 W) on a 1066 board, the E4700 (200 x 13 = 2.60 GHz, 2 MB) on an 800 board. If your board's list includes a 45 nm Core 2 Duo, that list beats this paragraph.

P965 and 975X: 65 nm quads at 1066

Both run a 1066 MT/s bus and list Core 2 Quad support, the 975X only on later board revisions, and neither has official 45 nm support. The G0 Kentsfield quads are the sensible ceiling: the Q6700 at 266 x 10 = 2.66 GHz or the Q6600 at 266 x 9 = 2.40 GHz, both with 8 MB of L2 and rated 95 W (the early B3 Q6600 is rated 105 W). The Core 2 Extreme QX6800 (2.93 GHz) shares the bus but is a 130 W part, so look for it by name on the list.

Some boards did gain 45 nm chips. Wikipedia notes that Asus and Gigabyte 975X boards picked up certain 1333 MT/s 45 nm processors with later BIOS releases, and a few P965 boards did the same. A Q9650 there runs the bus above the chipset's rating: the board maker's promise, not Intel's.

G31 and P31: read the list, not the brief

Intel's G31 product brief says 1333 MT/s is supported with Core 2 Duo processors only, and Core 2 Quad processors up to 1066. Board makers went further: ASRock's CPU support list for its G31M-S includes the Q9650 (E0) at 1333 alongside the Q6600 and Q6700. So the strongest sensible chip is whichever 1333 quad your list includes, usually a Q9650 or Q9550, or a Q6700 if the list stops at 1066 quads. Intel pitched the G31 at value systems and the boards cap DDR2 at 4 GB, so 95 W parts are the safer ceiling.

P35, G33 and the rest of the 3 Series

These carry an official 1333 MT/s rating with Core 2 Quad support, but Penryn arrived after them, so 45 nm support depends on the board having a BIOS released for it. Check the version on the support list. With that BIOS, the Q9650 is the pick. If the list also names a 130 W chip such as the Core 2 Extreme QX9650, the maker validated that power class, and the QX9650 adds a multiplier you can raise. The Xeon X3380 (333 x 9.5 = 3.16 GHz, 12 MB, 95 W) is the one LGA 775 quad faster than a Q9650 at the same rating, and it drops in natively, but only on boards that list it by name. On Q35 and Q33 OEM desktops, the vendor's specification sheet replaces the retail list.

G41, P43 and P45: built for 45 nm

Intel's ARK entry for the Q9650 lists the G41, G43, G45, P43, P45, Q43 and Q45 among its compatible chipsets, and the Q9650 is the pick on all of them. The G41 is the most common late LGA 775 chipset, usually limited to 4 GB of memory (some boards take 8 GB). Many P45 boards run a 1600 MT/s bus, but Intel's rating is 1333, so 1600 parts there are an overclock.

X38 and X48: the enthusiast pair

The X48 is the only Intel desktop chipset of the era rated for 1600 MT/s; the X38 stops at 1333. The fastest LGA 775 chip, the Core 2 Extreme QX9770 (400 x 8 = 3.20 GHz, 136 W), needs that bus, and it is hard to call sensible: Intel's Q9000-series datasheet states that it requires a special liquid cooling solution, not supplied with the processor. The QX9650 or a plain Q9650 makes more sense on either board.

Quad or dual core?

Quad-cores win anything that splits into threads, such as video encoding or a small home server. Dual-cores win when one or two threads do the work, as in plenty of older games.

On a 1333 board, the E8600 is 333 x 10 = 3.33 GHz with 6 MB of shared L2 at 65 W; the Q9650 is 333 x 9 = 3.00 GHz. Since 3.33 / 3.00 = 1.11, the E8600 has about 11 percent more clock per core, and the Q9650 has twice the cores. For a general-purpose machine, take the quad. For a retro gaming box, the E8600 is a defensible choice. On a 1066 board the gap widens: an E7600 (266 x 11.5 = 3.06 GHz) against a Q6600 gives 3.06 / 2.40 = 1.28, if the BIOS knows the 45 nm E7600 at all.

Skip the Q8200 and Q8300 when a better quad fits: 4 MB of L2, and some Q8000 sSpecs lack VT-x, as our Core 2 Quad and Extreme lineup explains.

Power, heat and the 130 W question

Intel's Q9000-series datasheet shows the power tiers boards were designed against. The 95 W Q8000 and Q9000 chips belong to 775_VR_CONFIG_05A with a 100 A current limit, the 130 W QX9650 to 775_VR_CONFIG_05B at 125 A, and the QX9770 is rated for 140 A. A board whose list stops at 95 W chips was never validated for the heavier class, even if a 130 W chip boots.

A cooler built for a 95 W Q9650 covers an E8600 or a G0 Q6600 and is undersized for a QX9650. Not every current cooler ships an LGA 775 bracket, so check before you plan around a heavier chip; CPU coolers that still fit LGA 775 covers mounting and clearance.

The Xeon adapter route as an option

The LGA 771 Xeon E5450 is the Q9650's server twin: 333 x 9 = 3.00 GHz, 12 MB of L2, a 1333 bus, rated 80 W instead of 95 W. With two socket key tabs shaved off, an adapter sticker on the chip and Xeon microcode in the BIOS, it runs in many LGA 775 boards. It only makes sense where the board already supports an E0 Yorkfield at 1333, so the G31 (by list), 3 Series, 4 Series and X38/X48 rows, never the older ones. The X5470 (333 x 10 = 3.33 GHz, 120 W) suits boards that list 130 W Extreme chips, and the 50 W L5420 suits slim cases. Page 2 of our mod guide, on motherboard compatibility, goes chipset by chipset and explains the microcode half.

A short LGA 775 CPU list for upgrades

Chip Cores Clock (bus x multiplier) FSB L2 TDP Needs from the board
Core 2 Duo E6700 2 266 x 10 = 2.66 GHz 1066 4 MB 65 W A 1066 bus
Core 2 Duo E7600 2 266 x 11.5 = 3.06 GHz 1066 3 MB 65 W 45 nm BIOS
Core 2 Duo E8600 2 333 x 10 = 3.33 GHz 1333 6 MB 65 W 45 nm, E0
Core 2 Quad Q6600 (G0) 4 266 x 9 = 2.40 GHz 1066 8 MB 95 W Quad support
Core 2 Quad Q6700 4 266 x 10 = 2.66 GHz 1066 8 MB 95 W Quad support
Core 2 Quad Q9550 4 333 x 8.5 = 2.83 GHz 1333 12 MB 95 W 45 nm quads
Core 2 Quad Q9650 4 333 x 9 = 3.00 GHz 1333 12 MB 95 W 45 nm quads, E0
Xeon X3380 4 333 x 9.5 = 3.16 GHz 1333 12 MB 95 W Listed by name
Core 2 Extreme QX9650 4 333 x 9 = 3.00 GHz 1333 12 MB 130 W 130 W regulator
Core 2 Extreme QX9770 4 400 x 8 = 3.20 GHz 1600 12 MB 136 W X48, liquid cooling

Before you shop, write three lines on a card: the chipset, the highest-clocked quad on your board's support list, and the BIOS version that list says it needs. Find your row in the first table, and the chip in it is the ceiling worth aiming for.

Parts links can earn us a commission.

Sources and further reading

Headshot of Marek Halloran
Marek Halloran

Marek writes the socket-mod and Xeon pages. He likes boards with too many jumpers, keeps a drawer of LGA 775 chips sorted by stepping, and reads Intel spec updates the way other people read box scores.